Reminds me of a hilarious bug in early GHC: https://gitlab.haskell.org/ghc/ghc/-/issues/163
The compiler will delete your source file if there’s any compile error. And the user complained only by sending a very polite email to report this bug. Simon Peyton Jones mentioned it in one of his talks and I still find it quite hilarious till this day.
While I have some sympathy for anyone who loses months of work, as an IT administrator by day, all I have to say about their lack of backups, and lack of RTFM before messing with shit is:
HAHAHAHAHAHAHA HAHAHAHAHA. you got what you deserved fucker. GL.YF.
It does warn you it will erase the file when you discard…
Go read the actual thread. There was a bug someone found that files you have in there that aren’t even associated with git still get deleted. I’m not entirely convinced this was the poster’s fault.
Warns you that changes will be discarded…not quite the same words
If you use git and understand that VSC’s source control stuff is just a thin wrapper around git, you should understand what “discard all changes” means
I just tried right now to get the exact message.
Are you sure you want to DELETE foo?
This is IRREVERSIBLE!
This file will be FOREVER LOST if you proceed.The confirmation button even says
Delete File
…User error.
This issue was from 2017
Ah looking at issue 32459 it was addressed shortly after.
You’re right that it did originally say “Discard”.
Man who clicks confirmation for leopards to delete his work is angry and surprised when his work is deleted.
Man I get paranoid about synchronization programs for this very reason. There’s usually some turnkey easy-mode enabled as soon as you first launch that’s like:
“Hey you wanna back up your entire NAS to your phone?! That’ll be fun, right?!”
And you’re like “…No.”
And then it wants to obliterate everything so it’s all “synchronized”, often it’s not easy to find a “No, stop, don’t do anything at all until I configure this.” Option.
iTunes was SO BAD about this.
Syncthing is the least-bad sync software I’ve ever run. It’s got some footguns but it’s still brilliant.
I would imagine there’s still ways to back up version controlled software right?
Fuck all victim-blamers. “Discard” is not how you label a button that permanently erases anything.
let’s turn this into a constructive angle for future devs and current juniors: just learn git cli, I promise you it is much simpler than it seems.
all those memes about git having like a thousand commands are true, but you really will only use like 7 at most per month.
learn push, pull, merge, squash, stash, reset, im probably missing like one or two
I promise you again: it is much simpler than it seems. and you won’t have to use these stupid git GUI things, and it will save you a hassle because you will know what commands you are running and what they do
short disclaimer: using git GUI is totally fine but low-key you are missing out on so much
im probably missing like one or two
commit. Lol
And mergetool ?
I don’t use push/pull btw.
You get pretty far with just clone, pull, add, commit, push
Every time I mentor a dev on using git they insist so much on using some GUI. Even ones who are “proficient” take way longer to do any action than I can with cli. I had one dev who came from SVN land try and convince me that TortoiseGit was the only way to go
I died a little that day, and I never won her over to command line despite her coming to me kinda regularly to un-fuck her repository (still one of the best engineers I ever worked with and I honestly miss her… Just not her source control antics)
If I want to commit a selection of files, but not others, then I’m clicking boxes not typing filenames.
That is the one use case I’ve seen where a gui is absolutely faster.
In my line of work, I primarily work on embedded systems or process automation so any new files in the repo directory either need to be added for tracking or to the ignore file. I’m not saying it will never happen, but at least in my experience it happens so rarely that I always try to teach command line when possible
git add -p
Did you not know?
You can simply select all files you want to commit, in the File Manager, Ctrl+C, then paste in the terminal and it will automatically add all those file names (full paths) separated with spaces at the cursor. At least in KDE: Dolphin ->zsh
+ Konsole it does.And sure, it might look like 2 extra steps, but you will still be clicking around a lot in case of a GUI anyway.
I tend to just type partial filenames and use tab completions, which are also pretty configurable. And the only dissatisfaction I have rn, is that I don’t have
zsh
module for completions with pascal case and snake case.
The difference in speed is familiarity, not some inherent efficiency gain by typing commands into the cli.
You’re 100% right.
But I defy anyone’s mouse-foo to come anywhere near the speed of my typing speed and alias list.
Even someone mastering GUI keyboard shortcuts isn’t going to be able to match, because my terminal is optimized beyond what is possible in a more graphical app.
What I’m trying to say is that no one can introduce a thoughtless mistake into production code as quickly as I can.
The real metric is dollars per second of destroyed hardware ;)
I once watched an engineer blow up a $200k prototype with a terminal alias.
That’s impressive. I’m glad I don’t have any story to match that. Hopefully they find it hilarious now. Probably no fun at the time.
that’s exactly why I’m saying this. I know from experience helping other devs with git issues it’s always because they’re using a GUI alternative to the CLI and they’re clicking on things they don’t understand
Currently using Tortoise and SVN for the first time at my job, and I hate it.
Welcome to the brotherhood. Haha. Ow.
Using SVN was like a having a thoughtful professional assistant who ignored half of what I said and occasionally threw medium sized objects at my head without warning.
You’re allowed to mock the whole organization mercilessly until they upgrade to git. Git is completely free, and the available upgrade tools are lossless. Also
git
actually works perfectly fine when naively treated like SVN.Source: I used git naively like SVN for awhile after (flawlessly) upgrading a huge number of repositories.
So I’m normally a command line fan and have used git there. But I’m also using sublimerge and honestly I find it fantastic for untangling a bunch of changes that need to be in several commits; being able to quickly scroll through all the changed files, expand & collapse the diffs, select files, hunks, and lines directly in the gui for staging, etc. I can’t see that being any faster / easier on the command line.
Heh, I guess this shows my corporate software dev experience. Whenever I’ve taught git workflows it was always paired with a work ticketing system where any changes you were making were ideally all one single set of changes. If you need a feature or bug fix someone else was doing that was being done on another branch which you could pull into your code early and for tracking purposes we always made sure the other person merged into main first. The only time I’ve seen per line manipulation with git was when someone made a ton of changes in a file and wanted to revert a handful of lines.
Everything else you mentioned I’ve had a web git host like gitlab or bitbucket for, but I kinda put that more into peer review workflow than git itself
The main draw to the CLI for me is portability. I’ve been a dev for ten years now and used tons of different editors on different platforms and while each one had a different way to describe the changes, how to commit, or how to “sync” (shudder), the CLI hasn’t changed. I didn’t have to relearn a vital part of my workflow just because I wanted to try a different editor.
For a first step you can get away with just add, commit, push, and pull. Maybe reset, but tbh using git like svn at first is fine.
Next branch, checkout and merge. At this point show, log, bisect and blame also start to be useful.
I’m not a fan of stash, and would instead recommend reflog and cherry-pick as the first two advanced commands to learn. Then rebase and squash.
Checkout
Personally, I’m pretty good with the CLI version, but sometimes I just use the Code VC interface. For some tasks (basic commit, pull, push) it’s pretty fast. I don’t know if it’s faster than CLI, but I switch between them depending on what I’m doing at that moment. Code has a built in console, so using either is pretty seemless and easy. If you only use the GUI you won’t ever understand it though. I think everyone should start with CLI.
Honestly, this is true for almost everything. GUIs obfiscate. They don’t help you learn, but try to take control away so you can’t mess up, and as an effect can’t do everything you may want.
I use gitkraken for two primary purposes:
-
Having a visual representation of my project history.
-
resolving merge conflicts
Of these, the first is really the only thing I really want a GUI for. I’ll just have it open on my side-screen if I’m managing some more or less messy branch structure or quickly want an overview of what has been done on which branches, where common ancestors are, etc. All the actual doing of things is done from the CLI, because it’s just better for that.
-
For me, it is easier to learn to use
git
via CLI instead of a UI. When I first started using git, I learned a few command/flag combinations that I use every day and I barely learned anything else about git after. Everything I don’t do regularly I don’t remember, but have written down in a text file of incantations. It is harder to write down what buttons and what menus I have to click.How about Git’s CLI stop being so shit? All of the options are obtuse & usually 3 ways to do the same thing.
Developers should normalize non-Git DVCSs.
Clone too 😁
5000 files
0 backups
Someone’s got their priorities mixed up.
having 5000 backups of 0 files is also kinda pointless.
Yeah, those are novice numbers. I have infinite backups of my 0 files!
You have to lose it all to know what matters (speaking from experience 😭)
I once lost three hours of work early on during my learning, not much that I lost but it was a moment when I learnt a lesson. Never lost work after that ever.
And they were trying to correct their priorities by looking into the source control features, so I don’t see how that’s anything other than victim blaming for them not doing it sooner.
I would argue that it’s common sense to at least make a point in time copy, to… IDK, a USB drive? Before trying to implement a new source/control system.
Just plug in an external drive, or a thumb drive, copy/paste, unplug it, then proceed with testing.
I don’t see how anyone who values their time and effort could do any less.
As for the files, undelete is a thing, and it shouldn’t be hard to do.
I always found Git GUIs, especially the ones built into IDEs, to be more confusing and clunkier than working with Git on a terminal. It often feels like unlearning what one knows about Git, and relearning it the way that specific GUI demands.
Heck, I am going through the aforementioned feeling as I force myself to use Magit on Emacs. It just does not feel intuitive. But I will not give up until I have made an honest and full attempt.
The only sensible Git GUI I ever used is Sublime Merge[0], after a coworker praised it immensely. Even that is reserved for the rarest of the rare times when the changes in the workspace gets unwieldy and unruly. For every other instance: Git CLI on a terminal.
[0] https://www.sublimemerge.com/
E: typo, and link to mentioned GUI.
JetBrains has really nice Git integration. Interactive rebaseses and merges are quite pleasant but I’m still dipping into the command line to do stuff occasionally. Most commonly a
git reset HEAD~
cause I want to split a commit though I had to dig through the reflog the other day cause I suddenly realized I lost an important branch that ended up being over a hundred commits back.How do you view diffs and merges when you say you don’t use git GUIs? External tool or terminal/command line?
I use Jetbrains IDEs and most of my life has been IDE based git interaction. And I honestly love it, easy access to see my diffs, the most common commit, push and stage(or shelve as Jetbrains does it, which is better than visual studio). Hassle free and available beats writing anything to me.
How do you view diffs and merges when you say you don’t use git GUIs? External tool or terminal/command line?
Terminal.
I use Jetbrains IDEs and most of my life has been IDE based git interaction. And I honestly love it, easy access to see my diffs, the most common commit, push and stage(or shelve as Jetbrains does it, which is better than visual studio). Hassle free and available beats writing anything to me.
Perhaps, it is a mix of learned behaviour and cognitive fixation, as I started out my development journey predominantly using a terminal, that I cannot fathom Git GUI being hassle free.
Nice to read a different perspective on such a fundamental thing that I take for granted while working. Thank you for sharing it.
I feel bad for this kid. That really is a bad warning dialog. Nowhere does it say it’s going to delete files. Anyone who thinks that’s good design needs a break.
Half the replies are basically “This should be obvious if your past five years of life experience is similar to mine, and if it isn’t then get fucked.” Just adding insult to injury.
I’m not great at English, but “discard all changes” shouldn’t ever mean “Delete”.
In the context of version control it does. Discarding a change that creates a file means deleting the file.
If you have set up your staging area for a commit you may want to discard (unstage) changes from the staging area, as opposed to discarding changes in the working directory.
Of course, the difference between the two is obvious if you’re using git CLI, but I can easily see someone using a GUI (and that maybe isn’t too familiar with git) misunderstanding “discard” as “unstage”.
Either way, what happened here indicates that all the files were somehow added to the VC, without having been committed first, or something like that, because git will not let you discard a file that is untracked, because that wouldn’t make any sense. The fact that the GUI let this person delete a bunch of files without first committing them to the index is what makes this a terrible design choice, and also what makes the use of the word “discard” misleading.
“Discard” is not a git operation.
Ok fair enough, but I’m under the impression these files existed before the source control was implemented.
I guess it’s all up to how the program handles existing files.
I guess the newly created git repository was empty, and all the files that was present in the folder represented “changes”
I’m pretty sure vscode shows a confirmation dialog when discarding changes will permanently delete a file. I’ve done that recently with temporary files that were no longer needed.
I remember following the drama back in the day. That warning you saw was the result of this now-classic bug report.
Did you even read the thread?
the alternative to deleting is emptying the file contents, which is essentially the same…
Also, why not send them to the recycle bin? I never really thought about it before, but that does seem a reasonable UX improvement for this case
I wonder if there’s already a git extension to automatically stash the working tree on every clean/reset/checkout operation…
Because “the underlying Git nukes them right away, so why shouldn’t we perma-delete the files, too?”
Anything else’d be effort…
Honestly it probably just runs the underlying git command
Sorta, but sorta no.
It was actually addressed in https://github.com/microsoft/vscode/issues/32459 – the GUI implied a different git command than what actually got executed!
It’s so fucking infuriating that so many devs act like this. “This should’ve been obvious!” Fuck off, that’s an unhelpful statement. “You should’ve been using version control! No backup, no sympathy!” Fuck off, they were literally trying to begin using version control for backups.
Even half the comments on this very Lemmy thread are disparaging this dev. I wonder how many actually read the thread and found that there was a bug discovered causing this feature to delete files not even associated with git?
But, congratulations to them, I suppose. Congratulations on making fun of someone. I hope it makes them feel powerful. 🙄 Devs can be so toxic.
Came here to say this. No one deserves this, not even new programmers who try to learn things.
Some programming tools are really powerful compared to what new users are used to. If you come from the world of Microsoft Office and Apple whatever it’s called, everything is saved automatically to cloud and there is some local backup file somewhere which you can just restore. Modern programs are designed to protect users against their own mistakes, and when suddenly that is taken away, it can be a jarring experience.
If you’re going to use a git tool, you need to know how git works.
There are 0 excuses for not having months of work in a repo, none. I have no sympathy whatsoever. How the fuck do you spend so many months without backing up your project or stuffing it in a repo?
No sympathy. Dude is a shit developer and he learned an invaluable lesson.
My guess is that this is a teenager, and this is probably their first experience with git and version control in general. Just a hunch.
Anyway, it is reasonable to expect a mainstream GUI app from one of the largest companies in the world to be approachable for people who do not know all the inner workings of the command line tools that are used behind the scenes. And it is reasonable to expect any destructive action to have clear and bold warnings. “Changes will be discarded” is not clear. What changes? From the user’s perspective, the only changes were regarding version control, so “discarding” that should leave them where they started — with their files intact but not in version control.
Have mercy on the poor noobs. We were all there once.
If you’re going to use a git tool, you need to know how git works.
I guarantee you at least half of git users would get glossy eyes as soon as you mention blobs and trees, yet they all still manage to use it daily successfully.
There are 0 excuses for not having months of work in a repo, none. I have no sympathy whatsoever. How the fuck do you spend so many months without backing up your project or stuffing it in a repo?
I need you to listen to me very carefully: THEY WERE FUCKING SETTING UP A REPO WHEN THIS HAPPENED.
No, by his own admission, he was playing around with the IDE. He wasn’t interested in the version control, he was interested in the pretty editor.
I suggest you go read the original issue.
I’m sure that the “three months of work” was completely shit code. Anybody who is unfamiliar with source control (or even backups!) is prone to making stupid mistakes. Republican voters are likely to have a similar experience over the next 4 years.
The real issue is already going 3 months without source control.
I have heard things from another apprentice who just does not use version control at all and the only copies are on his laptop and on his desktop. He is also using node.js with only 1 class and doesn’t know about OOP (not sure if you even use that in js no clue 😅) and has one big file with 20k lines of code I have absolutely no clue how he navigates through it
I know the type. Usually the kind of confident know-it-all who refuses to learn anything but delivers changes really quickly so management loves them. I had the misfortune to fix such a project after that ‘rock-star’ programmer left the company. Unfortunately the lack of professional standards in our industry allows people like that to continuously fail upwards. When I left the project they rehired them and let them design the v2 of the project we just fixed.
My company for the longest time had two engineers they would give all the new projects to. They would rush through some prototype code as fast as they could then management would bring in a new team to take the project over. The code was always garbage and crammed into one place. I kept getting new projects and instead of starting from a nice clean slate we always had to build on that garbage. It sucked so bad.
When I left the project they rehired them and let them design the v2 of the project we just fixed.
Lol. Wow.
And that is why I’ve been unable to work myself out of a job in all my long years as a developer.
Jesus, reminds me of a similar story. My gf once lost a job to someone who literally just pasted code into LLMs, also delivering quickly, even tho it was hot garbage. Anyhow, she spent a lot of her time fixing his shit and so her output went down. I hope that company burns to the ground with completely un manageable software.
We really need some kind of board like the one that controls the title for engineers.
Those are rookie numbers. I have at least a 35k one somewhere. More than one actually.
People run their businesses on this.
I once landed a job at a small company doing a software for medical analysis labs all over the country. Software had been around for over ten years at this point. They had no source control. Nothing. Absolute nightmare.
They were literally starting to use source control when I arrived.
In 2015.The “source control” when I first started was all the code on a shared drive, to check out a file you copied it to your machine, and renamed the extension on the shared drive to your initials.
When somebody edited without doing this there would be full blown meltdowns over lost work.
Reading this just give me a panic attack
He just heard monoliths were in again
Ey! Reminds me of my middle-school years! I still can’t belive I made an entire game without a single class… Just storing info in arrays and writing in comments what location represents what data. But I was a literal child, too young to read guides or sit through “long” tutorials.
I don’t want to sound too mean, but whenever I see anything similar at work, I wish that person get a job they’re actually good at. It’s fine and all that the company started hiring actual programmers to fix things, but the fact that the old crew still fucks shit up with senior privileges is a major grievance.
The person didn’t have any git repository; probably a new programmer that didn’t know how version control works and just clicked discard without understanding what that means in this situation
PEBKAC
I fucking HATE when abstractions over git use cutesy names that git doesn’t use.
That has the same energy as complaining that a file manager has “Delete” in the context menu.
except that the “delete” in file managers is actually “trash” and that’s for precisely this reason. Anyone not using the trash bin for a GUI that is capable of deleting files is either incompetent or malicious.
frankly
rm
should default to using the trash bin as well, for desktop-focused distros.I clicked delete and then clicked confirm when it asked me if I’m sure I want to delete, and all my files disappeared! What the fuck?!? Fuck this fucking operating system!!!1!!1one!!!
Did you even read the thread?
CANNOT EVEN FIND THEM IN THE RECYCLE BIN!!!
Yes, that’s what it means when it says “files will be permanently deleted, this is not reversible.”
https://github.com/microsoft/vscode/issues/32405#issuecomment-322155856
Also, check the linked issue to see the bug and UX problems. Particularly the first comment and this one: https://github.com/microsoft/vscode/issues/32459#issuecomment-322160461
I have a difficult time believing this was their fault. It is (was) bad UX.
Have you actually used VS Code, or are you just doing a bunch of research to disagree with a stranger on the internet?
I’m not doing “a bunch of research”, I just read the thread and the linked issue and I’m annoyed by people’s condescending comments about something it seems like they didn’t actually read. We shouldn’t shit on people for things we believe they did wrong, especially when, if you read the linked issue, it wasn’t their fault.
I use VS Codium (basically Code), but I don’t use it’s git integration other than maybe the occasional merge conflict resolution.
If the user didn’t read that, that’s on them. They used a feature they didn’t understand, which is part of a version control system that they also didn’t understand, and didn’t bother reading anything. If you still think they bear no responsibility for their actions then we’ll just have to agree to disagree.
Since they don’t actually have a git project tied to their files, “all changes” means “files created”. If they did have git configured then it would mean “changes since the last commit”, and it wouldn’t delete the files.
Edit: I will concede that it’s probably not immediately apparent to someone not familiar with the system that uncommitted files will be deleted if you use the revert button. But that comes back to understanding things before you go around clicking buttons that say the action is irreversible. At a minimum, they bear responsibility for not knowing what they were doing, and still charging ahead full steam.
Obligatory mention of file recovery as an option if you get in this situation.I recommend testdisk but there are other more gui friendly options.
NTFS takes a relatively long time to destroy the data so chances of recovery are good on Windows.