Just printed this plant pot and the quality is absolutely trash. It’s a large print (150mmx150mmx150mm) but printed using my normal settings. It’s solid wall - 4-5 perimeters thick. Sliced in Prusaslicer 2.6.1 and printed on an Ankermake M5. Any ideas?

Thanks!

  • rambos@lemm.eeEnglish
    3·
    1 year ago

    I agree this is probably mechanical issue (Z leadscrew or wheels/rails). How other prints look like? Maybe print some other model and see if issue still persist, just to exclude gcode