![](/static/66c60d9f/assets/icons/icon-96x96.png)
![](https://lemmy.ml/pictrs/image/h1ChnLuBHr.png)
The hostname is also sent out, so generic hostnames or a hostname randomizer at boot is also useful.
The hostname is also sent out, so generic hostnames or a hostname randomizer at boot is also useful.
First off you should realize that the registrar’s and domain name servers don’t have to be the same. Feel free to use any registrar (ex: namecheap, gandi, etc) and host the domain name server anywhere else.
Secondly, if you want a good API for dynamic updates, I’d recommend looking for something that supports nsupdate
, which is bind’s built-in update mechanism. It’s supported almost everywhere, including by let’s encrypt clients like Lego.
Can’t believe no one has mentioned Inovelli yet. Developed with the community, with OTA support in Z2M, they are absolutely fantastic and incredibly flexible!
https://inovelli.com/ blue series
PCIe absolutely does support disconnecting devices. It is a hot swap bus, that’s how ExpressCard works. But it doesn’t mean that the board/uefi implements it correctly.
It’s far more useful for them to maintain that image while essentially acting as a giant Room 101 for the entire internet. The three letter agencies, the fusion centers, and the Five Eyes of this world caneasily just parallel construction their way into what ever legal shenanigans they need.
Why use a catch all when you can configure postfix to use _
as a separator instead of +
. and then you can configure dovecot to automatically classify the selector into directories!
You should be good to go. Make sure vfio is loaded in the modules-load.d
vfio
vfio_iommu_type1
vfio_pci
vfio_virqfd
Make sure the module options are set correctly and the kernel module is blacklisted in /etc/modprobe.d/vfio.conf
options vfio-pci ids=1000:0097
blacklist MODULE_NAME
Make sure.IOMMU is enabled in your kernel command line (ex via grub): intel_iommu=on iommu=pt
This is probably not complete, but it should get you pretty far into allowing you to add the pci device in the hardware config of your vm
The way you do it in TinkerCAD would work in FreeCAD (and the others as well I’m sure) using a substractive boolean operation. That’s useful sometimes, though I’m not sure you model requires that. From the Part Design workbench in FreeCAD I would start with a sketch of the general shape, extrude it, and then all on to its various faces the sketches needed for additions and extrusions.
VPS’ are pretty cheap. Checkout https://buyvm.net starts at like 2.50$/mo
WordPress shop maybe?
Not sure about you latter point tbh. I run an email server, with nothing but grey listing and spamassassin and the amount of spam is absolutely minimal.
Proper config and fail2ban easily takes care of direct attacks.
Nevertheless, I wouldn’t recommend it to anyone but the most determined.
The domain won’t change that. Even with a static IP if it’s coming from an ISP owned up block you’re likely going to get banned. Even with reputable VPS’ it’s hard. Make sure you have DMARC, DKIM, and SPF setup, but even then almost certainly going to get banned. The big player are creating and inherent monopoly instead of improving their spam filters.
I don’t know about our mountains, but our cops sure love blowing stuff up. Sometimes even themselves!
As you’ve mentioned, I highly recommend you look at Prosody for the server. It is by far the easiest, but also really really good. The only thing ejabber might be better at is for extremely large deployments with failover and load balancing.
XMPP doesn’t use sip, it has its own protocol for voice and video calls (called Jingles). All servers, afaik, support it. On the other hand, SIP/RTP servers such as FreeSwitch and Asterisk do support Jingle bridging!
OMEMO and GPG support is purely a client side thing, so server support is irrelevant. Though some servers can be configured to refuse to pass unencrypted messages.
With XMPP bridges are usually implemented as external components (a feature built-into the XMPP standard). Slidge franeworm seems to be the latest and greatest in terms of external bridges: https://sr.ht/~nicoco/slidge/ a WhatsApp bridge is built using it: https://git.sr.ht/~nicoco/slidge-whatsapp
Prosody is also really easy.
Does snikknet federated properly? It’s weird they don’t seem to mention XMPP anywhere on the site
But your cousin almost certainly already uses XMPP, in the form of Messenger, WhatsApp, iMessage, gChat, Zoom, or something like that…
Yes and clearly OP is making the case for the latter.
It’s free as in free speech, not free beer. Also it’s FLOSS, not FOSS
Sounds like you want GPG and the web of trust.