![](https://lemmy.world/pictrs/image/1fd84ce4-3027-4b57-9270-bf2213aa1c2c.jpeg)
![](https://lemmy.world/pictrs/image/e4083c7c-83c3-4258-8370-708e95e309b3.png)
indeed I am
indeed I am
Did printing with PETG ever work with your printer?
You could create two gcode files for the same model, one for PLA and one for PETG and see if something stands out in their difference.
I got a farfetched theory … Maybe your printer is underpowered. Printing PETG requieres a higher temperature and thus more power. This is absolute guesswork, but you could try to disconnect your printer from the power outlet and tighten the screws for the power connections going from the power supply unit and going into your printers main board
Would love to see when you print it though
Gives me the idea of adding wings
Oh, and I thought you were pulling my leg. Well, thank you ^^
Ahh, don’t put salt in my wounds ;) I only had a few meters left and chose the wrong settings
I feel like its back and neck are also enlarged and rather “musley”
TIL :)