I test installed it in Proxmox in a Debian 12 LXC for the sever part, it was fairly easy, just run three commands. The client was as well, but failed to do something with the email during registration. It has a while longer to go I think. But I put it in my bookmarks to visit every so often as well. :)
I lost my respect for Asus when I had a Zenwatch 2 (I still have it), and they promised at the time Android Wear 2.0 in front our faces for months promising it would be released, but refused to even give an estimated time of release to OTA. This was well after WearOS 2 was released. Their online forum staff members were rude sometimes about it and other times, never responded to passionate asks about when it would be made available. The fact that they didn’t reply and care about giving any updates or indication at the time, was enough to push me far away from them.
I use Technitium DNS as both my DHCP and DNS Server on my network. I then have my ISP Router’s DHCP turned off, and point the primary DNS IP To Technitium’s on my network. I have roughly 66-67 network devices at a given time on my network, mostly wireless. (Think wiFi locks, Lights, Outlets etc) then I have my phones and gaming systems an any given thing.
To manage my IP’s I use an Airtable type of database via BaseRow, also self hosted. Through my router’s records, I copied/pasted every single MAC address I found, into a column in my BaseRow table there, and then added the device name or friendly name to another with an assigned IP I want to use. I have a more organized system of ranges 192.168.1.1-10 is mobile devices, 192.168.1.11-30 is IoT etc…
By having my network setup in this fashion, I accomplish a few things, all new devices which power on or connect to the router to get their IP assignment fail to get it since it’s turned off there, and they search the network for an available DHCP Server which lands squarely on the TechnitiumDNS server and are assigned it through there. I also have adblocking enabled through the same server so I have a more home wide adblock which works. (You’d be amazed at how much Telemetry a TV Sends out for every single remote keypress!) I have been able to block those with the adblock enabled. With the DNS server, you can also assign DHCP ranges address, it is really an overly complex server and probably overkill for a home network. I’ve only scratched the surface of what it can do.
If you don’t want to fuss with TechnitiumDNS, there’s AdguardHome, or even PiHole you can use if you want to block Ads (or you can simply disable that function) and those also act as a DHCP Server.
Or, if you are wanting to spend a few hours configuring it, you could run your own DHCP Server in a VM or dedicated device such as a Raspberry Pi.
With all of these settings, it’s important to set your DHCP lease offer long enough that if you have to reboot the DHCP Server for kernel update, or it crashes, you won’t have any devices fail as some do regular polling to check for connectivity (My Linux computer does this a lot). I don’t remember if it’s KDE or Arch. Anyway, running the DNS Server also allows you to custom build your own “domain” system if you will. So could assign maybe your self hosted Calendar for example to http://calendar.local or http://calendar.internal.
By setting up a dedicated DHCP Server, using the manual method or one of the different AdBlock systems, you can also turn off DHCP registration for ‘foreign’ devices or those which aren’t in your DHCP table. This offers a small element of extra security for your WiFi, but it’s not 100% secure if someone knows your IP ranges and Subnet Mask. Also, this will make it easier in the future for you if you upgrade your router or replace it as there’s just two settings to change. (DCHP Server off and the optional self hosted DNS).
Why not use a different DDNS service? There are plenty out there. :) I think this may solve your issue. I’ve been using freemyip.com’'s for a while and have had no problem in the past issusing LetsEncrypt SSL’s. At the moment, I’m on Cloudflare tunnels so it’s automatic with them, which I know is a huge trust issue for a lot of people, but I don’t mind it for my stuff. But I do like to have my DDNS as a backup service from time to time.
Mushroom cards
Local Tuya - so I can control my Tuya Devices without needing the cloud.
Wyze - I have a couple of cameras which are Wyze so I use it for those. I’m not against the cloud for some things. :)
Spook - not your homie – When I deactivate or rename a device (seasonally), it lets me know which dashboards need updated for example.
Playstation Network - so I can show what my PS5 and PS4 are doing while active.
Several other items such as themes I’ve tried out and probably more I’ve tried but never removed.
I have been using Tailscale, connected it to my domain, I use Authentik for my OIDC/SSO Sign in and tied it that way for the MFA OIDC Login Tailscale let’s you use. All I needed to do is setup a webfinger for it and once it verified my domain, I was able to give them my OIDC settings for them. Tailscale so far for me in the last year or so has been quite simple to use. Plus, being able to log into my admin console and any devices I enroll through Authentik’s front end, has given me peace of mind knowing it’s quite secure. (All of this on a Proxmox server BTW).
One may argue about self hosting Wireguard and I agree, it’s quite easy to do if you use something like wg-easy which makes it simple to add phones to your network. My concern with it though was having to poke a hole into my firewall for the WG traffic to hit the server, once I got into Tailscale, it’s made it easier and I don’t have any open ports on the router now. I think this is primarily why the Jupiter Broadcasting guys push it so much on their podcasts, not to mention one of the hosts on his podcast is an employee for Tailscale as well, so that probably helps a bit.
As for funding for both Nebula, or Tailscale, they do cater to enterprise customers so you have the assurance that they do have to answer to them if they revoke a service or ruin it. :)
For Tailscale, it’s just a matter of them allowing you to add 100 devices for free and it’s simple command to install it on any client via the cli including Apple TV for example. For phones, I have Tailscale on my phone connected 24/7 to my exit node which is my Proxmox server which acts as one, and as a backup, my Raspberry Pi which acts as one as well. So, even if I’m on the road or away from home, I’m always on my home network (unless blocked by overzealous sysadmins on their public WiFi networks). There’s not much to manage via the phone, but I like to think it’s ‘set and forget’ really, once you have it all configured, it just runs in the background and they do not decrypt your traffic much less care what goes through it.
I took a quick read of the comments and I apologize in advance if this has been suggested already.
I use a self hosted DNS server (AdGuardHome) I was using TechnitiumDNS for a long while, but moved over to the other recently so I could do some more blocking as needed (adult special needs house dweller sometimes needs limited internet). It also acts as a DHCP Server so it takes the role of both the DHCP assignments away from the router. As it so happens, this week, I got to experience the benefit of having this setup live when my main router also went down, I was able to switch to a spare router (My ISP provided one) and all I had to do was turn the DHCP off and optionally point the DNS To my AdGuardHome address, set the SSID’s up and I was in business. All of my devices happily reconnected and grabbed their assigned IP’s.
In short, if you have a spare computer, SBC such as a raspberry PI or whatnot, you can easily host something like that and not have to worry about setting those again.
I also use Stealth for my Reddit experience. It also doesn’t support comments or logging in. :) https://f-droid.org/packages/com.cosmos.unreddit/
Cyberchef, I’ve looked at but honestly for me, IT Tools works best for my needs so it’s all good on my end.
Dozzle is just log viewing plain and simple. Dockge shows more that’s all I know. I tested Dockge earlier on in development and haven’t been back since, I know it’s grown a lot more since.
I’ve seen a few mentions of PiHole and AdguardHome, I started on PiHole, then moved to AdguardHome for adblocking. Then I heard about and have been using TechnitiumDNS server which is sort of overkill for our needs, but with the right ad-lists, it is fantastic at blocking advertisements on my home network. Super fast install too, even on a Raspberry Pi 2 :) I run that along with Proxmox-VE (Protected behind OIDC Login) and several other containers on my cranky old Dell Desktop server.
Mostly Vaultwarden, and a few other services for home private use such as PairDrop for inter system sharing and a self destructing file sharing server for when we need to send documents to our Attorney’s (rarely but sometimes we need to) office via Pingvin.
I also run:
With Authentik setup, I can login to things like my Fresh Tomato Router TechnitiumDNS (Both use HTTP Auth headers) and Memos which uses OIDC/SSO. It’s meant to replace our Google Keep notes.
docker logs -follow command.I still use Portainer-CE and am happy there, I may try Dockage or the others, but it’s fine for what I need it for (It’s also protected by OIDC)
I’m sure I may have missed a few, but this post has gone on long enough. :)
What about bad actors which swipe the phone, and it’s behind the biometric lock? Too many failed attempts may or may not be a sign of it not working well, so if it bases part of it on the failed attempts, it would lower the chances of being further protected. I know they would ask for the pattern/pin or password to re-enroll the biometric, but let’s assume that’s already known, then game over.
You can always use something like SSHwifty It retains your logins through your browser’s session data and never on your server, but it will allow you to remote into your local system from anywhere on the WWW if you desire to do so. With Tailscale, once you are connected into your Tailnet, you can pretty much SSH into any of your devices as long as the subnet sharing flag is turned on I believe. I’ve never had any issues with mine not allowing any SSH connections.
Homebox - before we relocate - whenever that is, I will be printing labels and putting them under and behind my stuff, scanning it into there and then will use that to keep track of our items after the move to know what is in which box etc.
NocoDB Self Hosted (I use this for a few things) - started out with my network ip’s I have on my servers and ports for my containers and most recently a sleep log.
Just a couple there.
Grafana + Prometheus dashboards can be quite addicting or useful. Noted.lol put together a nice tutorial for getting started.
For most of my services though, I simply use Uptime Kuma which then sends an alert to Gotify when my services go down or whatnot, Gotify then instantly notifies my phone so I can be aware. It helps keep the spouse happy when their go to service for some reason crashed. :)
From their readme. I asked about that last night and he replied an pointed me to it. :)
Kiosk mode
Kiosk mode can be activated by a checkbox on the page. Note that there is no way out of kiosk mode (except refresh or closing the browser), and the play/pause and other controls will not be available. This is deliberate as a browser’s kiosk mode it intended not to be exited or significantly modified.
It’s also possible to enter kiosk mode using a permalink. First generate a Permalink, then to the end of it add &kiosk=true. Opening this link will load all of the selected displays included in the Permalink, enter kiosk mode immediately upon loading and start playing the forecast.
I didn’t see IIS mentioned, but I didn’t take a close look at the code. They give you a docker run command to set it up, so I converted it to a docker compose file so I can run it later. All of this is running on a Debian 12 system, so if IIS is needed, I’d wager that is if you are running a Windows setup.
I have mine embedded in Home Assistant now as an iframe using the Kiosk mode setting which works.
Looks nice! I set mine up and have it as an Iframe in Home Assistant. The app is a fork from https://github.com/vbguyny/ws4kp with his demo site here: https://battaglia.ddns.net/twc That version has the music we all came to know and love from back then.
Authentik is my IDP provider so I put it in front of all my publicly facing Apps which support OIDC login. For example, I can log into my Portainer instance from an external network, but to do so, I log into Authentik First which sends it to my service.
For the apps which support HTTP headers, like I said, Pomerium acts as the service which passes my credentials to the device. I admit - Authentik does this also without the need for Pomerium, (through their flow settings) but I found Pomerium to be much easier to set up for this than Authentik and haven’t looked back or felt the need to change it.
With that, I use Pomerium for apps which accept a HTTP Headers, for example, my Fresh Tomato firmware flashed router, it has a HTTP dialog. This allows me to login from the road if I need to manage something like rebooting it or updating firewall rules etc.
My access flow is this :
router.example.com —> Cloudflare Tunnel —> Pomerium IP —>Authentik —> Router’s Gui.
It works flawlessly. I don’t often use it, but when I do, it helps. I also had it enabled for AdguardHome but moved to Technitium DNS which I prefer and that doesn’t have the HTTP Headers so it’s not fully compatible with Pomerium that I’m aware of.
I have a TCL ROKU TV which is way too chatty on my network. It sends every single keypress on the remote to their servers (just look into the dev console which is easy enough to see what is logged). I have an adblock dns server on my network
These are just in the last 23 minutes of the hour. As I understand, it’s not always doing this if they are not blocked, but when you block them, it starts to panic!
The advantage of doing this is instead of having the ad on the right side of the home menu, I have a nice translucent adbox with nothing in it… Also, if you look up the secret codes for Roku menus, you can also toggle the ad server they use so sometimes if some slip through, you get some in house tested ones which are sometimes funny. But that’s extremely rare for us.
Our next TV will probably be a display or offline only and be a streaming box with custom firmware such as Librelec or something else when the time comes.