![](https://lemmy.ca/pictrs/image/1579e718-acfe-44b5-8e2e-bb0951efe640.webp)
![](https://sopuli.xyz/pictrs/image/8237c39e-cb2b-45cc-a6a1-ce36f0f09ffa.jpeg)
North Georgian here. Decidedly no.
North Georgian here. Decidedly no.
Or the pet stores with the pictures of sad puppies and kittens on the card machine asking for handouts. Pisses me the fuck off.
Are you saying octopus are all incest babies? Scandalous.
Hopefully someone recommended for you to grab the .2mm nozzle since you’re interested in minis.
so you can’t really pirate it.
Is it still pirating if you use pirating methods to obtain it?
What I linked is the official ISO from M$
windows 10 iso are not available for download
You mean this isn’t available to download; https://www.microsoft.com/en-us/software-download/windows10ISO
Or something else?
A lot of that seemingly came from when modder = cheater in GTAV. Saw a huge swing to that at the height of that game’s popularity.
Edit: Read through the comments and it’s related to GTA but in a different way. The guy was comparing bootlegging to modding because someone in his country, Indonesia, was modding GTA:SA to add children’s show characters to it, changing the packaging to make it more appealing to children, and then is selling the discs to people. Which is a whole other can of worms.
Anyone else that mentioned they didn’t like modding didn’t really elaborate.
Oh, it’s got other issues than that, but the crackling is the most unnerving.
Some of the audio from my Jellyfin media player (flatpak) just hasn’t been playing. So I check Helvum and sometimes it just doesn’t even patch it over. I got the deb of JMP installed and that seems to have made it behave, but the maintainer of JMP hasn’t made that easy with all sorts of weird patches and junk.
My only issue with pulse audio was that I had to open Pulse effects each time I restarted my computer because it wouldn’t auto load the settings.
Nah, it would just circumvent them.
I thought it was when I switched over to pipewire, but no. I’ve got severe audio crackling problems now and I want to go back to pulse for all it’s faults.
Kept forgetting to tell you, you will want this for your ams and I use these for dryboxes. You can just grab some totes from the dollar tree or somewhere cheap and throw those in with the filament. Quick and easy way to keep your filament dry.
Here’s a hygrometer stand of the same type so you can keep it uniform.
Fill them with this stuff here.
Make sure it’s the rechargeable kind so you can just keep redrying it and you’ll never run out.
This is all especially important if you plan on printing PETG. PETG is affected much more by moisture than PLA.
Well support structure will be needed on overhangs and stuff like that so don’t write it off.
I don’t use it much since I’m mostly printing things that don’t need it as they were designed to print in place.
No, no. I offered assistance.
What do I do with the white one? Put it in the last slot? Does the machine know when to use the white one as a support?
I don’t use the support filament as I have enough filament that using a bit for a model or two here or there isn’t a huge loss. However, you can use the Bambu Studio program and “paint” the support structures with that filament and it will use that instead of whatever normal filament you are using.
(Note on this, because these machines use NFC for the official bambu filaments, it might do it automatically. Don’t count on that though and always double check.)
You can keep it in your AMS anywhere you like, but for those onboard print files, it typically uses AMS slot one.
What would you consider is your favorite filament to work with? I’m thinking of splurging on a set off ebay. But at the same time, are discount filaments ok?
I love Inland filaments because I’m close to a Microcenter and can go and physically look at them before purchasing them. If you aren’t close to a Microcenter though, Inland filaments are Polymaker and eSun.
If you plan to get cheap filament, make sure you keep your bed as clean as you can because you want to rule that out immediately if there is an issue. I use Isopropyl alcohol before every print to remove any grease/oil/dust from the bed.
And do you use a special plate? People have mentioned golden ones that are easier to bend to pop out the build? Mine just scraped off fairly easy. And I’ve read to use hairspray or windex to make it easier to pop off later.
I use the standard PEI plate that comes with the machine. I allow the bed to cool off in the machine and then get the print off. Makes it much easier.
Controlling these printers is best done from a PC. Bambu Studio will give you the most options to control your prints. The Bambu Handy app works great as well but I find it limiting.
It’s ok, my dude. We all make simple mistakes like this. I’ve cost myself entire rolls of filament before. If you ever have any questions, give me a shout, I’ll give you a hand.
These printers calibrate themselves.
Not sure, I’ve never opened mine.
This is it here: https://us.store.bambulab.com/products/support-for-pla?variant=40524454723720
TDS says it’s still PLA.
deleted by creator