It will definitely not report back to Musk on your proprietary code…

Because Musk wouldn’t understand shit, it’ll report back to some Indian guy instead.

“But it’s still mostly the same team, please give us the benefit of the doubt 😭😭😭😭”

Don’t be stupid, don’t buy from a publisher before the 1.0 release

deleted by creator

Assuming prusaslicer, go to print speed settings, and look for “slow down on overhangs”. Also, under filament > cooling, there’s an option to increase fan speed on overhangs.

You can use the top left menu on the layer view to check that the fan and print speed are actually adapting properly to the overhangs.

Yeah, if the nozzle is hitting the part, then it’s very likely a cooling issue. If an steep overhang isn’t cooled properly, it’ll curl upwards.

Either you’re printing too hot, or the fan is too slow or failing. For PLA, you can leave the fan at 100% after the first or second layer, and print between 195 and 205°C. Printing too fast also means the fan may struggle with the amount of hot plastic.

Can you paste your slicer settings?

Remember when Google’s motto was “Don’t be evil”?

“Developers” are the ones who are passionate about the games they make, and definitely don’t want their games dead.

“Corporations” are the ones who only want to profit from selling the game, and then ditch it once it’s no longer lucrative enough.

Lower the Z offset. Not by too much, or it’ll scratch the bed.

“Everything is failing” is not useful info at all. Post a video of the failure happening if you don’t know how to describe it.

Any videos of when the print fails? Is it all prints or just the Benchy? Does it always fail at the same height?

From the available info, I’d guess it got knocked off the bed because the nozzle hit the curled overhang, which indicates the first layer is too high, decreasing adhesion, and the fan is not blowing enough, so the overhangs don’t cool enough, which allows them to curl upwards and get in the way of the nozzle.

More info = better diagnosis.

It’s one possible solution for one of the problems under the same umbrella. If you can’t or don’t want to run the servers for your online game (eg: Echo VR), just open source the server’s code and let the community keep the game running.

Absolute fucking clown. He’s just scared of open sourcing old games because everyone will see how shitty his code is…

Never enough alternatives

They had already hinted they wanted to make Subnautica 2 into a multiplayer co-op, and they specifically mentioned “games as a service”.

After backlash, they specified the multiplayer would be optional, and “games as a service” means long term updates, not microtransactions, which sounds suspiciously like a rollback to me…

I was already kind of expecting that, seeing as below zero’s map wasn’t half as interesting as the first game, the storytelling was mid, and the mechanics were all over the place, like they just wanted to make another hit by shooting in every direction, with half the work put into it.

As a young man, I’m just waiting for the AGI breakthrough, so it either fixes the fucking government, or wipes us out. Win-win.

Or just use an ABL probe and skip all the speculation.

The Lyon does not concern himself with closed source bullshit 🗿

All I know is they took down the ones by LTT and Jeff Geerling, I can only assume it was due to the larger audience those two attracted. Now imagine PewDiePie…

But I’m not…

Are they offering to pay me?

Download the video before YouTube takes it down. I want to see that site flooded with reuploads if they do.

scp

I’m never using a flash drive again.