![](https://lemmy.sdf.org/pictrs/image/1665e206-b892-4516-9a77-bd6e95ead528.png)
![](https://lemmy.world/pictrs/image/8286e071-7449-4413-a084-1eb5242e2cf4.png)
There is no such thing as a Backup, only Redundant copies
There is no such thing as a Backup, only Redundant copies
3D Printing & Using NASA Space (Ratcheting) Wrench Here on Earth - @Barnacules
What is your roommate’s printer Also, what is your budget Going to need to include filament if you don’t have any of your own
If in the US, are you nearish to a Microcenter
So they found Nibiru
I replaced the springs on my Ender 3 Pro with Bed Stiffeners when I added a CR Touch. There is no need to level the bed anymore
I’ve got about three months before thinking of planting
I’m guessing a lack of vision resulted in an improper implementation with too many issues they don’t want to spend on fixing
Maybe the subject can be uploaded to a Tesla Bot as a backup
After doing my research, I’m going to be using XigmaNAS as the OS for my NAS build
Going to need 32 GB of RAM or more plus a GPU with 48 GB of VRAM just to run Win12 w/ AI subsystem so you have enough headroom to run a program or two
There is no such thing as food safe plastic
Light would still bend the same way near the black hole The radial acceleration of the spin would act against the gravity of the mass at the equator mostly causing a flattening Earth is the same way, wider in the middle than its height due to its rotational velocity Non-spinning black holes are a thought experiment as there have been none found All known black holes spin Gravity does affect Space Thus gravitational lensing and the bending of light plus objects orbiting other objects of greater mass Thus when an object spins it pulls on Space If massive enough it pulls or drags Space along in the direction of rotation, it’s known as Frame Drag This is a measurable effect in the Space around Earth and seen to great effect around black holes
Nope, look at it blown up Nozzel is way too high You can see the bed through the lines Plus you have a few broken lines, likely lifted as the extrusion is to far from the bed The lines need to be short and wide not tall and thin
Z-offset is too high Try babystepping it down till those issues go away
Sovol SV06 or the bigger Sovol SV06 Plus Well, within the budget
You’ll be limited to PLA and PETG for filaments
My first PETG print
Enders print just fine but tend to be a bit more maintenance-heavy
Double your budget at least or be willing to learn the ins and outs of how 3D printers work at a basic level Be sure to check out the Tomb of 3D Printed Horrors on YouTube if you are into minis
Sounds like someone is salty for not winning