My first zigbee device was Sylvania (73685) rgbw led strip. On it’s own it worked fine but once I started trying to add sengled zigbee bulbs I kept having problems with pairing the bulbs or keeping them connected. Zigbee uses 2.4ghz so I thought maybe interference so lowered power output on wifi AP 2.4ghz band & even turned it off for testing but didn’t help. I think I read somewhere that sylvanias caused that problem. I unplugged sylvania led strip, reset & rejoined everything else and had zero problems. Tried to add the sylvania back in and disconnect problems came back after awhile. It was past the return period so now I keep it unjoined and plugged into a zigbee smart outlet. I sometimes have to remove power from it to join new devices or when I restart zigbee controller. Currently have mix of sengled bulbs, thirdreality plugs, sonoff plugs & sensors, and single aqara tvoc all working together fairly reliably.

What are max print speed and volumetric set to?

For some filaments (silk PLA) I’ve had to slow things down (120mm/s max print speed and 10mm3/s max volumetric speed) or it comes out horrible. Only used 0.4 nozzles so far though.

Slicers for FDM are open source and lots of forks. The built-in printer profiles vary a lot but can be created from scratch. You can find lots online to use as examples too. I currently use Cura, Prusaslicer, and Orcaslicer.

I’m more interested in printing plastic than tuning/upgrading the printer itself so I recommend a printer with automatic z-offset and bed leveling. Basic maintenance tasks such as cleaning, oiling, and greasing will need to be done on occasion no matter the printer. Beyond that I’ve only done simple retraction tuning.

I started with Elegoo Neptune 3 Pro. Klipper firmware upgrade improved speeds a lot. It wasn’t bad for a budget printer but lack of automatic z-offset can be frustrating so I replaced & gave it away to friend. Replaced it with Creality K1 which was a lot easier to get started with thanks to automatic z-offset calibration. Output quality is good but to get better would require upgrades + tuning. Been saving up to replace with Bambu Lab P1S combo so I can also do multi-color printing.

deleted by creator

I’d recommend using distro you know best and/or most prefer to work with. I use the flatpak install of Jellyfin Media Player but there are also deb files available.

I’m currently using minipc with Intel n5105 (or something similar) for 1080p HTPC. Debian 12 OS with auto-login & Jellyfin Media Player starting at login. I control it with pepper jobs RF remote but also have a logitech wireless keyboard+touchpad for it. Keyboard+touchpad come in handy when browsing media sites on firefox but some might restrict quality. Some of the newer minipc’s I tried required adding backports repo to install newer kernel for wifi to work. I had been playing with Debian a lot when I set up first one & been using clonezilla to image them so it’s stuck.

Ordered a gmtek n97 minipc to play with and should have it in about a week. Going to test it out with 4k but it’s not a deal breaker for me if it cannot handle that well enough.

Yep, asking for something I’m sure a lot of us would love to have, a ready to go TV remote control style usage, but rather than having discussions about why those options aren’t viable just downvoting.

Create a backup image from the working SD card. Write that backup image to a spare SD card and verify it works. Then try to do ‘apt update’ and see if anything breaks. If it breaks you got a spare SD card ready to go :)

I had issues with DNS checks and traced it to my pihole. I changed that container’s resolv.conf to use cloudflare DNS and it has been working fine since. It was with Caddy so needed to change over to use IPs.

Another thing to remember is the client needs to support decoding the video in hardware or have enough CPU to handle it in software. I have intel i7 (3rd gen) with no hardware HEVC/x265 support but it has enough CPU to power through.

Plex still wins on client compatibility, ease of server & client setup, and at least has the 3 commonly used oidc login providers available.

Jellyfin you may need to point external clients to your server manually as well as setup everything so they can actually connect. There are so many ways to do this that it can be paralyzing to actually decide which to try as a beginner. Local clients can usually use discovery if the firewall and container are setup correctly for the jellyfin server. Accounts have to be created manually unless you use something like jfa-go. For oidc, there’s only 3rd party plugin in alpha state and looks like people use it so guess it works well enough.

As others have said, you can have both running on the same system pointed at the same content. If you’re following the plex naming scheme should match pretty well in jellyfin, nfo files work really well for jellyfin metadata too. Lets you get an idea of it and whether it could meet your needs.

I mostly switched to Jellyfin over 3 years ago, shutdown my plex server 2 years ago after many tiny annoyances over the years. I had tried to get my family switched over but it is too much hassle for them and myself still. Been working on setting up some cheap htpc’s for that purpose but it’s not a priority for me.

Self-host your own ACME server. Then you can use certbot pointed there.

These instructions are old so not sure if newer/better ways, https://blog.sean-wright.com/self-host-acme-server/

Is MariaDB on spinning disk or ssd?

I initially set up Nextcloud with MariaDB on spinning disk but it was slow even completely empty. I moved that container to ssd & performance was a lot better. The web UI may still have some slow loading parts but I can’t say for sure since rarely use it. Caldav+carddav+Nextcloud client are how I usually interact with it.

Sounds like bridge mode is needed for the vm’s network interface in virt.

I would say proxmox ve is easier to start with.

Does TrueNAS have a web UI that works well on mobile browsers for file download and upload? If it does then could probably use for simple scenarios.

The container method used should be whatever you are more familiar with or prefer. They both have their own quirks, pros, & cons.

SELinux - If you don’t want to deal with SELinux then set it to permissive mode. If you want to keep in enforcing mode you need to create the appropriate policies, https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/using_selinux/configuring-selinux-for-applications-and-services-with-non-standard-configurations_using-selinux

Firewall - If you don’t want it’s protection then look up instructions to stop & disable it on your distro.

Port forwarding - From linux container side you either need to specify host networking or the ports you want to allow through, there is no avoiding that if it needs to be network accessible. If you want it internet accessible then you need to setup port forwarding on your router.

Have you looked into something like yunohost? It may be the kind of thing you’re looking for.

If router supports it, a static route via connected machine with IP forwarding enabled might work. OpenWrt has packages for things like tailscale and zerotier so could do it without an extra machine too.

For 3, if router supports it could also try doing static route via Tailscale joined machine that has IP forwarding enabled

If your router lets you try adding a static route for the tailscale IP/subnet to the laptop with IP forwarding enabled.

My current workaround for that is adding whatever I want to shuffle into a playlist. I have one with some sci-fi shows in it that I regularly use. Smart collections is my most missed feature from Plex.

edit: nvm, doesn’t sound like it would help your use case, read through it too quick first time round

Was it the official container image or 3rd party? Whichever it was, they should get notified so that init script can get fixed to prevent similar happening to others.