Prusa slicer, partially because I have a mk3s+ but also because I tried to use cura many times but always several minutes into using it, my entire laptop just shuts off, like the power was pulled, no logs written to disk, no error message. It’s the only program to do that and I can’t even report an issue because there’s no logs I can submit. I assume it’s related to taxing my GPU in a way that causes a power related fault.

Are specials requestable in jellyseerr? They aren’t in overseerr, so they have to be manually requested in sonarr. Also, sonarr uses tvdb and as I understand it, it’s unlikely to ever support tmdb, so if jellyseerr uses tmdb like overseerr does, then that could be another source of confusion if there are differences.

For now if you use sonarr you just have to accept tvdb and set other things to use tvdb where possible (Plex and jellyfin), and accept mismatches where it can’t be changed (like overseerr / possibly jellyseerr too since it’s a fork)

This would be huge, one of the biggest draws to Plex for me is being able to use a single account to watch content across all my friends servers from any Plex UI (be it the hosted one at app.plex.tv or the copy hosted with each Plex server)

Stuff like this really makes me want to switch to jellyfin, but I watch stuff from me and my friend groups libraries and Plex lets me search for shows across my entire friend group at once. I’m afraid I’ll be waiting forever for jellyfin to allow federating servers so that bob@red.instance can share a library with alice@blue.instance allowing Alice to browse red+blue instance content from their home instance UI instead of requiring an account with every instance.

That looks like an imax release, maybe the top/bottom black bars are on the Blu-ray it was ripped from to make it fit 16:9? Since it’s a remux they shouldn’t have touched it to remove the bars.

Do you get ads in the subtitles though?

“Subtitles downloaded by VIP members are free from any embedded ads, offering a cleaner viewing experience.”

I haven’t used opensubtitles much but have been considering setting up bazarr, using a source that embeds ads in subtitles would be a non starter for me.

I would even be totally willing to pay for increased download limits but not if it means supporting putting ads in the free subtitles.

If you have good home upload and want to host at home, a simple reverse proxy on the vps provider of your choice does the trick. I host for a large group of friends and family and it all proxies through haproxy running on digitalocean.

Yeah the ultra dock is amazing, I got the mop dryer and water change kit addons, so it auto refills the clean water tank from my washing machine water line, and auto empties the dirty mop water out a tube I stuck down the washing machine drain. I used to have to refill/empty those water bins every week but now the most frequent maintenance is rinsing out the water filter every 2-3 weeks. Everything else seems to be only required monthly.

I’ve been downloading tons of my Spotify music using spotdl and sticking it on Plex, which kinda accomplishes most of what you want. I then organize it with lidarr. Spotdl doesn’t actually download from Spotify but it uses Spotify metadata to tag files after matching with and downloading from YouTube music, it might just use youtube-dl/p under the hood but being able to give it a Spotify playlist, artist, or album url from Spotify makes it super convenient. For some artists I just download the entire artist in one go.

Maybe, but only if literally everything else is the same. Otherwise it could just mean that one place is cleaner than another, or that one vacuum has a big bag and needs to be emptied less frequently despite picking up the same amount.

• Roborock bag size is 3L (6"x6"x5"), so think 1 and a half 2L soda bottles, since it doesn’t need to fit inside a handheld vacuum or a moving robot it can be this large. Comparatively, the Matic bag which you can see in the video looks super tiny.
• My apt is ~500 sq feet, so “1 time around the house” isn’t very much
• How many dirtying factors apply to your house?
  • Pets going in and out track in extra dirt, our cat is indoor only and only sheds some fur (I didn’t have the cat when the dock bag lasted a year so we’ll see how that impacts it)
  • Allowing shoes to be worn inside tracks in a lot of dirt - so we don’t allow shoes past the entrance shoe rack
  • Going in and out more times allows more dirt to be tracked in - I work from home so I don’t need to go out every day which greatly reduces the amount of dirt tracked in
  • Living with more people multiplies those many times over, for me it’s just me and my partner
  • Ground floor apartment or elevated - another factor since going up flights of stairs lessens the amount of dirt tracked in. Our apartment is up 3 flights of stairs, so by the time we get to our front door, most mud and dirt has fallen off our shoes. If you live on the ground floor, it’s more likely that dirt and mud can hitch a ride in the treads of your shoes

So it really makes sense that my dock’s bag doesn’t fill up quickly. I can be absolutely sure it works because it produces gray mopping water every time it’s run, and there’s not a speck of dust or cat hair on the floor after it runs. I can check the bin on the robovac after a run and see it 1/3 full of fur and dust, but the bin on the robovac itself is on the small side so once it empties into the dock it seems to barely add much volume - and I suspect that the dock’s vaccum is powerful enough to compact fur and dust into the bag somewhat so it takes up less volume. And that makes sense because the S7 has some of the best pickup performance as rated by vacuum wars on youtube, but I can really stretch the dust bag in the dock both because it’s a whopping 3L bag, because I do everything I can to prevent dirt from being tracked in in the first place, and also because some of the dust is mopped and flushed down the laundry room drain without ever seeing the bag.

Damn that bag must be super small to only last a week. My s7 ultra dock bag lasts around 6 months. Before I started living with a cat I was still using the original bag that had been going on a year and still wasn’t full, vacuuming daily.

Edit: For context, my roborock dock’s bag is 3 liters, so think the volume of 1 and a half 2 liter soda bottles, and the apartment it lasted a year in was ~500 sq ft. The matic’s bag needs to fit inside the robot and looks to be close to the size of the palm of your hand. You can see it at 0:37 in the video on their site.

That’s because a robovac enables you to clean super frequently. The marginal cost of vacuuming and mopping with a robovac is 0, so there’s not much reason not to schedule it to run every day (or night if your model is quiet enough) so you can have spotless floors every day. I set mine to run vacuum and mop at 5am every day so I can wake up to freshly mopped floors. There’s no way I would ever want to put in the required amount of daily cleaning to achieve that if I didn’t have a robovac. The dock empties the bin, washes the mop, and refills the water tank through the laundry room water spigot as well as pumps the dirty mopping water out the washing machine drain tube in the wall so it’s fully automated and I only need to rinse the water filter every couple of weeks and change the docks vacuum bag every 6ish months.

If you don’t have any desire to have floors cleaned daily or to automate that then it makes perfect sense to just do a weekly cleaning like you do, but if you want to have 10 hours of cleaning done weekly then a robovac/mop is great for that.

Last time it stopped working for me I just needed to update revanced manager, make sure the patches were updated on the main screen, and re patch the recommended APK version which had increased. They’ve done a pretty good job at keeping up

Oh yeah that’s annoying, I just search for the version on apkpure or apkmirror and usually one of those will have a standard APK I can download and select for patching.

I’m unrooted and I use revanced manager to patch YT and didn’t notice anything about needing root. I use the change package name patch so I can have the official YouTube app installed side by side with the revanced version since Chromecasting only works for me in the official app.

That’s hilarious, assuming they only regulate prebuilts or full kits, all you’d need to do is something like add everything from a voron parts list to your cart to get around it. I wonder if sellers would also be able to offer partial kits to bypass it too (like offering a frame kit, x axis kit, extruder kit, etc and you just add all to cart)

I do use jellyfin, I run it side by side with Plex on the same Intel nuc with quick sync - both with the exact same media folders added - and I let my friends choose. I don’t think a single one of them prefer jellyfin unfortunately.

Plex has a reverse proxying service and can do upnp for you so it works with dynamic IPs out of the box with no need for a domain or forwarding ports. It defaults to upnp and falls back to the Plex hosted reverse proxy which also uses a dynamically generated subdomain and gives you a free SSL cert. Granted I prefer to host my own reverse proxy anyway with my own domain (when I had a static IP I just forwarded a port and set up an A record) but out of the box Plex does make it much easier for a non technical user to hit the ground running.

A dht crawler is inherently an intensive service to run, magnetico used sqlite and would take 10 minutes just to load the splash page that includes the total count of discovered torrents.

I just keep a USB c dongle permanently attached to my wired headphones, I forget it’s there. It adds like 1" to the overall cable length. I basically just converted all my wired headphones into USB c headphones.