SuprNova was the big one for me. Everything else was either redundant (Like RARBG) or just faded away (like my Usenet sources). I didn’t have any replacement lined up when SuprNova died.

FTFA:

A few years and one pandemic later, the company filed for bankruptcy on Monday,

It’s also in a bunch of comments already

Even at stores that have this feature, I rarely see people use it. It’s clearly not an experience that people flock to.

OTOH, on the rare occasion I’ve visited a Walmart in the past 10 years, I have a 100% rate of checkout taking an absurdly long time. Everyone there just seems to accept it like they have no choice.

As long as it’s advertised openly, I don’t see a big problem with it. It would probably be sold as a discount for shopping at slower times, though. It’s a tried-and-true method of smoothing congestion.

Assuming a store with 9a-9p hours (every day), a 9-5 worker can shop 44 hours in a week, vs 40 they cannot. But that doesn’t particularly line up with the busy hours. Around here, after 7 on weekdays and 5 on weekends tend to get pretty slow.

You have to keep in mind the scenarios where it will be used. While truly fast charging does exist today (20 minutes or so for 80% charge), that is not widespread, nor is that the way it’s typically done. Level 3 (DC fast charging) is expensive (moreso than gas), potentially detrimental to the battery, and still usually not very fast (an hour at least). As such, you aren’t going to charge at your local gas station the same way you get a fill up today.

Most people use a level 2 charger, either at home or at work. This means it can sit for 8 hours to refuel. Many parking garages have this as well. Level 2 chargers deliver AC directly to the vehicle, meaning you don’t need a lot of infrastructure- just a 240v line and a billing system. This in turn means it’s cheap and relatively easy to install. Sometimes you’ll see these outside of Starbucks or a grocery store, but not especially often. You’ll get ~25 miles of range per hour charging using level 2. But even if you spend 2 hours drinking coffee, or buying groceries, you’ve only added 50 miles of range.

This is where level 3 comes in. It requires some pretty significant equipment (which is part of why they’re always broken), because it has to convert AC into high voltage DC. It also has to chill the cables internally, otherwise they’d quickly overheat from the electricity passing through. But this takes up space that’s probably not really available in the lot.

I am seeing fast chargers now being installed at travel centers/truck stops along major highways. It fits in nicely with regular stops on a road trip for food. I’m also seeing them being installed at most Walmarts, since that’s perfect for grocery shopping.

Around here, that last group has been from Electrify America, which does NOT require an app. They have a standard credit card reader.

Licensing and activation are separate, and only loosely related. If you are at anything resembling a large org, they don’t even use the HWID or OEM key- they will be using an internal KMS server.

It really sounds like you have way more permissions than you should have on a work device. You should’ve hit a wall even attempting to install Win11 (I can confirm that my work blocks this very effectively). I also question why you would want to do that at all. I’m also not sure you needed to do anything to activate- I believe 10 and 11 use the exact same HWID/keys/etc

Many private trackers, and even a few public ones, have a request forum. The private ones reward users that fill these requests, so they are often effective.

There are some very accessible private trackers (sometimes referred to as semi-private) that meet these requirements. Once you get set up, they can be very set-and-forget. Just avoid the forums.

Unless you’re on a self-hosted VPN (defeating the whole purpose), it’s not especially hard to identify VPN connections. All of the common ones are known, and many use IP ranges and reverse lookups that clearly identify the VPN/seedbox provider.

It’s a bit harder when you are connected to one that resolves to a residential-looking hostname. But again, unless it’s truly unique (defeating the purpose), simply sorting users by IP will reveal almost all of them.

Some trackers used to do this to weed out people with multiple accounts. Some of the big ones still actively detect and block (or punish) anyone connecting to their website with a VPN (torrent traffic is still generally allowed, though)

I think you mean LGA (Land Grid Array), meaning the pins are on the motherboard. Ball Grid Array (BGA) is used for embedded, non-removable CPUs.

The only thing I’ll add is that RAID is redundancy. Its purpose is to prevent downtime, not data loss.

If you aren’t concerned with downtime, RAID is the wrong solution.

TorrentLeech has open registration several times per year. Keep an eye on Opentrackers.org for any of these. Note that some are open, while others are open application. The latter means you must meet certain criteria to be accepted. Typically this is proof of your stats on other trackers, but sometimes it’s exclusively for refugees from one that failed.

Keep in mind that you will not ever find open registrations on an established, reputable tracker. They don’t need more users. They only recruit from lesser, more accessible trackers. You will need to start on these to establish yourself. There are plenty of guides on this, with most starting on RED or MAM.

If you aren’t on any of these, it’s not because they’re too hard to get into- it’s because you don’t want to put in the effort. Which is exactly what private trackers want to avoid.

Also, smaller doesn’t always mean bad. TorrentDB was a rising star, with regular open invites, right up until its collapse. Even the giants like PTP started from nothing. Getting in early is a perfectly viable strategy, especially if you help grow it.

The absolute easiest and simplest would be to modify your grub config to have a longer timer on the boot menu, effectively delaying them until the NAS is up.

That doesn’t necessarily mean it’s the best option- there are ways to make the actual boot process wait for mounts, or to stagger the WOL signals, or the solutions others have mentioned. But changing grub is quick and easy.

You’re overlooking a very common reason that people setup a homelab - practice for their careers. Many colleges offer a more legitimate setup for the same purpose, and a similar design. But if you’re choosing to learn AD from a free/cheap book instead of a multi-thousand dollar course, you still need a lab to absorb the information and really understand it.

Granted, AD is of limited value to learn these days, but it’s still a backbone for countless other tools that are highly relevant.

What do you mean by “last”? I know it’s a common term, but when you dig deeper, you’ll see why it doesn’t really make sense. For this discussion, I’m assuming you mean “How long until I need to buy a newer model?”

First, consider the reasons you might have for buying a newer model. The first is hardware failure. Second is obsolescence - the device cannot keep up with newer needs, such as speed, capacity, or interface. The third is insecurity/unsupported from the vendor.

The last one is easy enough to check from a vendor’s product lifecycle page. I’ll assume this isn’t what you’re concerned about. Up next is obsolescence. Obviously it meets your needs today, but only you can predict your future needs. Maybe it’s fine for a single 1080p* stream today, and that’s all you use it for. It will continue to serve that purpose forever. But if your household grows and suddenly you need 3x 4k streams, it might not keep up. Or maybe you’ll only need that single 1080p stream for the next 20 years. Maybe you’ll hit drive capacity limits, or maybe you won’t. We can’t answer any of that for you.

That leaves hardware failure. But electronics don’t wear out (mechanical drives do, to an extent, but you asked about the NAS). They don’t really have an expected life span in the same way as a car battery or an appliance. Instead, they have a failure rate. XX% fail in a given time frame. Even if we assume a bathtub curve (which is a very bold assumption), the point where failures climb is going to be very unclear. The odds are actually very good that it will keep working well beyond that.

Also of note, very few electronics fail before they are obsolete.

*Technically it’s about bitrate, but let’s just ignore that detail for simplicity. We’ll assume that 4k uses 4x as much space as 1080p

TL;DR: It could fail at any moment from the day it was manufactured, or it could outlast all of us. Prepare for that scenario with a decent backup strategy, but don’t actually replace it until needed.

That the market buying internal drives is generally willing to pay more for the product vs the people buying an external drive? Because cost of the parts (AKA Bill of Materials, or BOM) is only a small part of what determines the price on the shelf.

The fact the WD has a whole thing about refusing to honor the warranty (likely in violation of the Magnuson-Moss Warranty Act) should tell you what you really need to know.

TL;DR: It’s about the warez “scene”, specifically about music pre-releases. A decent read, but one you may have seen before.

Are they obfuscated in any way? Depending on your client, you may not be able to see the names and subjects. But if you didn’t have the NZB, is there any real chance you could find it otherwise?

First, a massive amount of content is removed. You won’t find a lot of popular, unencrypted content these days on usenet. It’s all encrypted and obfuscated now to avoid the bots

Speaking of bots, I don’t think you realize how much of this process is automated, or how wide of a net is being used. The media corporations all have enormous collected libraries of material. It gets posted constantly to all sorts of places. This includes public torrents, public usenet, YouTube, PornHub (yes, really, even for non-porn), Facebook, TikTok, Tumblr, GNUtella, DDL sites…

The list goes on and on. Each one gets scanned for millions of potentially infringing items, often daily. No actual people are doing those steps.

Now, throw in things like private torrents, encrypted usenet posts, invite-only DDL, listings that use ‘3’ instead ‘e’ or those other character subscriptions… These require actual humans to process. Humans that cost money, and a considerable amount of it. As a business, you have to show a return on investment. Fighting piracy, even at its theoretical best, doesn’t increase revenues by a lot.

You mention revenue and breaking even, but you left out an important detail. Your time is free. They don’t have to pay $10/month, they have to pay $10/month + $20/hour for someone to deal with it. And most pirates of that level will just find another method.

There’s a few logical possibilities here.

#1 is that whatever stimuli produced it the first time keeps producing it later.

#2 is that you clearly did remember them enough, possibly when you woke up, to commit it to long term memory. This is a tautology, because you would have to remember it to know that it was in previous dreams.

#3, as someone mentioned below, is your mind playing tricks on you. Ever had a dream where you knew an object was something important and specific, even though its appearance in the dream was clearly not that? E.g. you know you’re at your (specific) friend’s house, but that’s not at all what their house looks like. Dreams have a lot of weird substitutions like this, including the idea that you’ve been somewhere before

But would you let him put a chip inside your head, potentially controlling your thoughts and access to information?