• 0 Posts
  • 25 Comments
Joined 1 year ago
cake
Cake day: June 12th, 2023

help-circle










  • I bought a bl touch a few years ago. Decent printer. I updated the firmware and added a bl touch. That’s when it all went wrong. I now recommend staying away from biqu as their customer service is non-existent. To your problem, as stated by another commenter, get an updated firmware from biqu’s site. I compiled my own, which may explain some of my issues. My initial issues came with the probe offset. I dug a deep line in my plate and took several attempts to realize that I need to change my offset only in the machine parameters, not in the abl menu.








  • My only idea of the top of my head is trying another heater block. Make sure you use thermal paste as well to help with heat transfer. I know those probably won’t help, though. I posted, though, to mention I was running a BIQU B1(Peice of Crap) using BIQU’s HS2 V2 lite(love that, though) extruder. One print went fine, and then I was suddenly overextruding. I had to change my steps from 930 to 250 or so. Then, after powering down and turning back on, my number needed to return to the 930 value. Very weird, especially without a shutdown.



  • I’m away now, so I can’t find sources. I just modified a good sealing container with 1.25" dowel across the middle that holds 4 rolls high in the box. Cut holes and printed fittings for the pneumatic tube fittings. Put silica litter in the bottom. Now I have 4 rolls in a dry box, cheap, that each have their own port at the top of my printer. I’d recommend, though, trying to put each roll on its own roller, as that’s kind of a pain.