I use an S-Biner keychain. https://a.co/d/7nuHlqm
Let’s you take you’re yubikey or thumb drive off your keychain eff effectively infinitely without it wearing out.
I use an S-Biner keychain. https://a.co/d/7nuHlqm
Let’s you take you’re yubikey or thumb drive off your keychain eff effectively infinitely without it wearing out.
Spent a full day setting up Nextcloud so I could file sync my machines and share files externally. It was slow as hell and didn’t work half the time.
Spent 10 minutes spinning up Syncthing and FileBrowser containers and have had zero issues with them since.
Come on down to catwarehouse.com
The Oracle Cloud VPS only has SSH key authentication enabled by default. You can also set it to only allow SSH from your home IP in the virtual firewall before the machine is ever spun up.
Their current free ARM offering is 1 machine with 4-cores and 24gb RAM for life. You can also add another 2 AMD machines with 1-core and 1gb RAM and still be in their free-tier.
If you’re going to set it up and take advantage of the ARM machine, make sure you pick a home location for your account that has multiple availability zones. San Fran right now only has 1 zone, so if the shared ARM instances are all used up, you’ll have to wait a few days and try again. Phoenix I think has 3, so you can try with another zone right away.
Using a Pi3b to run AdGuard Home and a TailScale subnet router.
I’ve got another Pi3b running Octoprint/Klipper for a 3d printer, but I’m currently migrating that to Mainsail running on an old SFF PC so I can run multiple printers with Klipper off the same PC.
The rest of my stack is on an actual server running UnRaid with like 50tb raw storage.
I will say that TailScale has been annoying asf with their subnet router setup not actually forcing the correct DNS for AdGuard Home so I can have ad-blocking while away from home. I had to move back to a pure Wireguard setup directly on my router for DNS to work properly.
Middle schoolers (age 11-14) just rip around on 2-stroke dirt bikes where I’m at. Even a 100cc dirt bike will hit 50mph at WOT.
At least e-bikes aren’t noisy like the awful buzz of a 2-stroke a half-mile away.
I use an Antec P101. It can fit 8 3.5" drives with a couple 2.5" drives on the back of the MOBO tray.
Fair warning, this thing is fucking huge. Didn’t realize how big it was when I bought it, but I needed the extra drive bays, so its kinda necessary.
I’m surprised more people in the selfhosting community aren’t recommending Mikrotik.
Their cheapest routers have all the same software features as their enterprise gear. They’re also one of the only companies who makes most of their routers and switches capable of being powered with POE in and redundant DC power.
All of their newer ARM based routers support running docker containers natively on the routers extra features. You can run PiHole/AdGuard, nginx, tailscale, etc. directly on your routers hardware.
I’ve been running a hexS for 3 years without any issues. I run multiple VLANs and wireguard directly on it, and it has an SFP port that I can use for an ONT module to get a fiber connection directly to my router from my ISP. I think it cost me $60 when I bought it.
Docker containers running the -arrs and Plex live on the SSDs so they load faster. Downloads are cached to SSDs so that read/write speed isn’t a limit when lots of downloads are running simultaneously. The downloads then get moved to a spinning disk array for long term storage whenever Unraid runs it’s ‘mover’ operation.
+1 for Mikrotik.
Get one of their routers that have an Arm or x86 processor and you can run PiHole and a DDNS updater on there as containers. Wireguard support (client and server) is built in.
Even their cheapest hardware that runs routerOS has access to all the same features as their enterprise level gear.