Got these two servers for free, they are pretty fun and nice to use!

  • chiisana@lemmy.chiisana.net
    link
    fedilink
    arrow-up
    13
    ·
    1 year ago

    I’m glad you’re excited, but G5 and G6 are going to be pretty noisy and power hungry. I hope you’ve got enough space and cheap electricity.

    • Krafting@lemmy.worldOP
      link
      fedilink
      arrow-up
      8
      ·
      1 year ago

      but G5 and G6 are going to be pretty noisy and power hungry

      It’s just for fun, not running 24/7! Also, the G6 is close to silent and the G5 is indeed a jet engine, but I’ve never touched HPE servers before and I’m glad I can learn more about them!

      • flying_monkies@kbin.social
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        If the management interface doesn’t support changing the fan speeds, check to see if the IPMI commands will workk for it.

        Picked up an old Dell server years agonwith their IDRAC 6 interface. Turned out that version of their IDRAC didn’t support fan management, but it also accepted raw ipmi commands. Was able to slow the fans down to the point where you don’t even notice them.

        • Krafting@lemmy.worldOP
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          I did this for a R715 from Dell, works like a charm indeed, but I can’t find any documentation about this on old HP gear…

      • chiisana@lemmy.chiisana.net
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Silent is good!! 🎉 However, it might still be a good idea to pop into iLO or use IPMI to check and make sure you’re within the right temperature range… just in case. Old equipment and all, never know if the parts are still functioning as expected. Have fun!!