So I have finally built my NAS. I used an N100 CPU because I saw it has low power consumption.

Right now I have 2 NVMe SSDs and 2 HDDs. I have installed proxmox on the 2 SSDs as RAID1. I have not partitioned the HDDs yet, they are just plugged in and powered on.

Just booting into proxmox, without any VMs or containers running, I am pulling 45W from the wall. This looks super high to me, and I’m afraid that starting to use the HDDs and running some VMs may double this…

I don’t have much references, but I have an Odroid with an external self-powered HDD, it is using 5W. I have a raspberry pi 4 with an external HDD, the raspberry is pulling 3W and the HDD 3W.

With these data, I was thinking I wouldn’t go over 20W. 45W is enormous and not something I can run 24/7, kind of a fail for a NAS…

Have I done something wrong or is it just how much it’s supposed to pull?

Edit: I have come across powertop. Using the auto tune, I was able to drop to 33-35W. I have unplugged the HDDs and dropped to 22W. I guess I cannot go lower, this may be because of the PSU or the 2 NVMe

  • Kwa@derpzilla.netOPEnglish
    1·
    8 months ago

    Thanks that would be cool. Also if you can tell me if this is a NUC or something larger.

    • DreadPotato@sopuli.xyzEnglish
      4·
      8 months ago

      I’m not the other user, but this is my NUC running proxmox with 2 VMs and 2 LXCs. Running with an old i3, 16gb ram and a single 1tb NVME, no mechanical HDDs, and a few USB peripherals like a ZigBee dongle.

    • whereisk@lemmy.worldEnglish
      2·
      8 months ago

      I’m running a n100 16gb with a 256ssd, 4vms and 4 docker images, it’s pulling 7-9w.

      • Kwa@derpzilla.netOPEnglish
        2·
        8 months ago

        Thanks, this is really efficient. I now have good hopes that changing my PSU should bring me closer to this

        • Possibly linux@lemmy.zipEnglish
          2·
          8 months ago

          You still won’t see that low of power consumption when you have something custom built.

          With that being said you have a lot of room for improvement

        • whereisk@lemmy.worldEnglish
          2·
          8 months ago

          It’s literally one of those little known brand nuc, tiny box - beelink I think. Total cost $200 or so - it’s been running non stop for the last 3 months without an issue. I don’t think it even has a fan in there.

          • paf@jlai.luEnglish
            1·
            8 months ago

            Curious, might have same machine but do consume a bit more, do you have one SSD + one nvme?

            • whereisk@lemmy.worldEnglish
              2·
              8 months ago

              Sorry, I must have been too tired, got nearly all details wrong: 32GB RAM 1TB M.2, USB3.2, BT4.2,WiFi 5,4k HDMI, Gigabit Port, and not a Beelink but a DreamQuest. There’s just the M2 interface disk connected, no SSD.

    • paf@jlai.luEnglish
      2·
      8 months ago

      So pc is consuming 13W, this is with one nvme + one SSD, pic at 30w for a few seconds at boot.