I’m sure I’m massively overthinking this, but any help would be greatly appreciated.

I have a domain name that I bought through NameCheap and I’ve pointed it to Cloudflare (i.e. updated the name servers). I have a Synology NAS on which I run Docker and a few containers. Up until now I’ve done this using IP addresses and ports to access everything (I have a Homepage container running and just link to everything from there).

But I want to setup SSL and start running Vaultwarden, hence purchasing a domain name to make it all easier.

I tried creating an A record in Cloudflare to point to the internal IP of my NAS (and obviously, this couldn’t be orange-clouded through CF because it’s internal to my LAN). I’m very reluctant to point the A record to the external IP of my NAS (which, for added headache is dynamic, so I’d need to get some kind of DDNS) because I don’t want to expose everything on my NAS to the Internet. In actual fact, I’m not precious about accessing any of this stuff over the internet - if I need remote access I have a Tailscale container running that I can connect to (more on that later in the post). The domain name was purely for ease of setting up SSL and Vaultwarden.

So I guess my questions are:

  • What is the best way to go about this - do I create a DDNS on the NAS and point that external IP address to my domain in Cloudflare, then use Traefik to just expose the containers I want to have access to using subdomains?
  • If so, then how do I know that all other ports aren’t accessible (I assume because I’m only going to expose ports 80 and 443 in Traefik?)
  • What do other people see (i.e. outside my network) if they go to my domain? How do I ensure they can’t access my NAS and see some kind of page?
  • Is there a benefit to using Cloudflare?
  • How would Pi-hole and local DNS fit into this? I guess I could point my router at Pi-hole for DNS and create my A records on Pi-hole for all my subdomains - but what do I need to setup initially in Cloudflare?
  • I also have a RPi that has a (very basic) website on it - how do I setup an A record to have Cloudflare point a sub-domain to the Pi’s IP address?
  • Going back to the Tailscale thing - is it possible to point the domain to the IP address of the Tailscale container, so that the domain is only accessible when I switch on the Tailscale VPN? Is this a good idea/bad idea? Is there a better way to do it?

I’m sure these are all noob-type questions, but for the past 6-7 years I’ve purely used this internally using IP:port combinations, so never had to worry about domain names and external exposure, etc.

Many thanks in advance!

  • schmurnan@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    Absolute superstar, thanks for your help so far. I’ll make a start on some of this tomorrow and see how far I get — either with Traefik or NPM.

    Do I need to do anything with the domain itself on Cloudflare at the moment? Or do I just leave it with its current A record pointing at an IP address (it was done as part of the setup in Cloudflare so I have no idea what that IP address is).

    Obviously that domain in reality will just sit there doing nothing.

      • schmurnan@lemmy.worldOP
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        OK so made a start with this. Spun up a Pi-hole container, added mydomain.com as an A record in Local DNS, and created a CNAME for traefik.mydomain.com to point to mydomain.com.

        In Cloudflare, I removed the mydomain.com A record and the www CNAME record.

        Doing an nslookup on mydomain.com I get

        Non-authoritative answer:
        *** Can't find mydomain.com: No answer
        

        Which I guess is to be expected.

        However, when I then navigate to http://traefik.mydomain.com in my browser, I’m met with a Cloudflare error page: https://imgur.com/XhKOywo.

        Below is the docker-compose of my traefik container:

        traefik:
            container_name: traefik
            image: traefik:latest
            restart: unless-stopped
            networks:
              - medianet
            ports:
              - 80:80
              - 443:443
            expose:
              - 8080
            volumes:
              - /etc/localtime:/etc/localtime:ro
              - /var/run/docker.sock:/var/run/docker.sock:ro
              - /volume1/docker/traefik:/etc/traefik
              - /volume1/docker/traefik/access.log:/logs/access.log
              - /volume1/docker/traefik/traefik.log:/logs/traefik.log
              - /volume1/docker/traefik/acme/acme.json:/acme.json
            environment:
              - TZ=Europe/London
            labels:
              - traefik.enable=true
              - traefik.http.routers.traefik.rule=Host(`$TRAEFIK_DASHBOARD_HOST`) && (PathPrefix(`/api`) || PathPrefix(`/dashboard`))
              - traefik.http.routers.traefik.service=api@internal
              - traefik.http.routers.traefik.entrypoints=traefik
        

        My traefik.yml is also nice and basic at this point:

        global:
          sendAnonymousUsage: false
        
        entryPoints:
          web:
            address: ":80"
          traefik:
            address: "8080"
        
        api:
          dashboard: true
          insecure: true
        
        providers:
          docker:
            endpoint: "unix:///var/run/docker.sock"
            watch: true
            exposedByDefault: false
        
        log:
          filePath: traefik.log
          level: DEBUG
        
        accessLog:
          filePath: access.log
          bufferingSize: 100
        

        Any ideas what’s going wrong? I’m unclear on why the domain is still routing to Cloudflare.

          • schmurnan@lemmy.worldOP
            link
            fedilink
            English
            arrow-up
            0
            ·
            1 year ago

            Actually, no I don’t see anything coming through.

            So the IP address of my router is 192.168.1.1, IP of my NAS is 192.168.1.116.

            Checked the DNS on my Mac and it’s 192.168.1.1. Checked the DNS on my NAS and it’s 192.168.1.1. I changed the DNS in my router to 192.168.1.116.

            Have I missed a step somewhere?

            • MangoPenguin@lemmy.blahaj.zone
              link
              fedilink
              English
              arrow-up
              0
              ·
              1 year ago

              It sounds like you haven’t updated your routers DHCP server to hand out the Pihole IP to clients. You can manually set the DNS server to the Pihole IP on your Mac for testing too.

              The flow should be: Clients > Pihole > Router > Public DNS

              Or you can skip the router: Clients > Pihole > Public DNS

              • schmurnan@lemmy.worldOP
                link
                fedilink
                English
                arrow-up
                0
                ·
                edit-2
                1 year ago

                I wasn’t planning on using Pi-hole for DHCP - I have a LOT of reserved addresses on my network and I don’t fancy having to move them all over. My hope had been to use Pi-hole for DNS but keep the DHCP reservation with the router.

                I’ve manually updated the DNS on my Mac to 192.168.1.116 and I can now access the Traefik dashboard via http://traefik.mydomain.com:8080 (so, getting there). So some kind of issue with the DNS on my router I think - caching maybe?

                • MangoPenguin@lemmy.blahaj.zone
                  link
                  fedilink
                  English
                  arrow-up
                  0
                  ·
                  1 year ago

                  Yeah that’s fine, you just need to change the DHCP settings on your router so it gives the Pihole IP for DNS. It’s possible some routers don’t allow that though.

                  • schmurnan@lemmy.worldOP
                    link
                    fedilink
                    English
                    arrow-up
                    0
                    ·
                    1 year ago

                    Figured it out. It’s a weird setting on Netgear routers whereby you have to also update the MAC address. All been working well for the last few hours and getting queries running through Pi-hole.

                    I’ve also got my Homepage container setup at http://home.mydomain.com and configured Traefik a little further so it’s now accessible from http://traefik.mydomain.com (no port).

                    For the past few hours I’ve been struggling with getting Pi-hole behind Traefik and accessible using http://pihole.mydomain.com. Only works if I stick /admin on the end, which defeats the object of using a subdomain. Found a forum post suggesting to use Traefik’s addPrefix after declaring the Host as pihole.mydomain.com, which works great for accessing the login screen, but when you enter the password it just loops back to the login screen.

                    Also tried a few other things that ultimately broke the Pi-hole container and took out my entire connection, as everything is dependent on Pi-hole for DNS! So need to figure out some kind of resiliency/backup for that (my router is using the NAS IP as it’s primary and only DNS server).

                    So, some progress. I’ve set Pi-hope back to IP:port and I’m gonna focus on getting other containers behind Traefik and leave Pi-hole till last. Then and only then will I look at SSL certificates (unless it’s advised to do it earlier?)

                    Any pointers on any of the above would be appreciated! And thanks again for getting me this far.