Hi everyone,

I’m not sure if this is the right community, but the home networking magazines seem to be pretty dead. I’m a bit green with regard to networking, and am looking for help to see if the plan I’ve come up with will work.

The main image in the post is my current network setup. Basically the ISP modem/router is just a pass through and the 10 Gb port is connected to my Asus router, which has the DHCP server activated. All of my devices, home lab and smart home devices are connected to the Asus router via either Wifi or Ethernet. This works well, but I have many neighbours close by, and with my 30+ wifi devices, I think things aren’t working as well as they could be. I guess you could say one of my main motivations to start messing with this is to clean it up and move all possible devices to Ethernet.

The planned new setup is as follows, but I’m not sure if it’s even possible to function this way.

https://i.postimg.cc/7YftSFt6/IMG-9281.jpg

ISP modem/router > 2.5 Gb unmanaged switch > 2.5 Gb capable devices (NAS, hypervisor, PCs) will connect directly here, along with a 1 Gb managed switch to handle the DHCP > Asus router would connect to the managed switch to provide wifi, and remaining wired devices will all connect to the managed switch as well.

Any assistance would be appreciated! Thanks!

Edit: fixed second image url

  • mhz@lemm.eeEnglish
    71·
    1 year ago

    OP needs a proper router that make use of their 3g fiber which will be mostly newer and powerfull and has better wifi. That should be their 1st priority.

    Edit: You don’t need a 2.5gb ethernet (or better for futur proofing) for every client, but that NAS and Hypervisor could use that bandwith so consider yor options while you are at it.

    • rehydrate5503@lemmy.worldOPEnglish
      1·
      1 year ago

      I could definitely use the ISP router as well, and just add a 2.5/10G switch, but it is very limiting and when I first tried it, it would reset my settings every time the IP changed (anywhere from 1 week to 1 day). I definitely want the NAS, HV and my main PC on a faster connection.

      • ferret@sh.itjust.worksEnglish
        1·
        1 year ago

        You can always use your current router as an AP and use an x86 pc with 10gbe or 2.5gb network card(s) as your main router (or even a switch)