I am building my personal private cloud. I am considering using second hand dell optiplexes as worker nodes, but they only have 1 NIC and I’d need a contraption like this for my redundant network.

Then this wish came to my mind. Theoretically, such a one box solution could be faster than gigabit too.

  • ninjan@lemmy.mildgrim.com
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Personal Private Cloud then all the money spent on a truly redundant network back-bone is far better spent on just about anything else. Especially if your solution relies on notoriously unrealiable USB nics.

    If redundant everything is important then you need to change your planning toward proper rack servers and switches, only way to get a cost effective reliable redundant setup. Use CEPH rather than RAID and ideally, if your workloads are runnable as containers, use a solution that allows you to abstract away the whole server concept as well. Hyper-converged infrastructure is excellent for cost effective setups.

    • akash_rawal@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      1 year ago

      If redundant everything is important then you need to change your planning toward proper rack servers and switches

      I ain’t got that budget man.

      • ninjan@lemmy.mildgrim.com
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Then skip redundant networking and use that cash on the router hardware such that you get enough ports that you won’t need a switch

        • akash_rawal@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          It is for a challenge, the goal is to build a cloud with workload decoupled from servers decoupled from users who’d deploy the workload, with redundant network and storage, no single choke point for network traffic, and I am trying to achieve this with a small budget.

          • ninjan@lemmy.mildgrim.com
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            Ah okay. If you don’t have any PCI slots available then USB is going to be the only option then. Though if you have WiFi you could use that as your fail over solution.

            Basically, from a hardware standpoint, I’d say a minimum viable solution would look like (no wifi):

            • 2 cheap 4-6 port Switches. Preferably with an uplink port and then you can mock redundant ISP connection by putting a splitter on the WAN connection and putting it into each of the two switches.

            • 3-4 worker nodes each connected to both switches. Preferably a PCI nic but if that is a non-starter then USB. Though here is where pretty much every cent should be spent. Important that each has a minimum of 200 GB storage because that enables you to abstract storage into a CEPH pool and still have enough space to run some decent example workloads.

            All other redundancy can and should be handled in software. OpenStack is one approach, Proxmox can probably also work.