Has anyone tried Tailscale to connect to Jellyfin?

I am not very knowledgeable about networking. I found I can connect to my Jellyfin server if I set under Networking “Allow remote connections” and in the remote IP address filter I put the remote IP that Tailscale assigns to my iPhone.

Is this how it’s supposed to work? I didn’t expect to have to use Remote Access Settings. I thought the point of Tailscale is to make it like you are on a local network.

  • pe1uca@lemmy.pe1uca.dev
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Yes, that’s the idea, if you’re not running tailscale in both machines then you won’t be able to connect to them (unless you do some other networking configurations).
    Once you have tailscale running in both machines or devices, you only need to use the Tail IP to connect to them, they will find each regardless if they are in the same local network (connected to your home router) or across the internet.
    If you want to have access to your jellyfin without connecting to tailscale it’ll require more configuration depending on your set up and you’ll have to take care of the security implications of the internet being able to reach your computer or server.

    A bit more information:
    My jellyfin runs in my computer, so with tailscale I have at least these IP addresses

    • 127.0.0.1: The machine itself (or localhost)
    • 192.168.X.X: The address in your local network (usually your ISP’s router)
    • 100.X.X.X: The Tail IP.

    Now, in my phone I can be at several places and I can access jellyfin like this:

    • Same local network: 192.168.X of my computer, 100.X tail IP of my computer (if I’m connected to tailscale).
    • Mobile data or any other wifi: 100.X tail IP of my computer only when connected to tailscale.

    Again, I won’t recommend you on making your jellyfin instance public to the internet, just make sure to always be connected to tailscale.
    If you want to share your instance then you can check to share it within tailscale to the specific people you want.

    • SiriusCybernetics@lemmy.caOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Thank you that is tremendously helpful! I expect this post will help others that come along.

      So confirming for your setup, you do need Remote Access enabled to use 100.x while home on your local network on wifi as well (and of course while away on cellular).

      That’s how it seems to be for me, so I think I’m set up correctly. I don’t believe I’ve opened any unusual ports or anything like that.