Oof, so the price has gone up but this is what I am using: https://www.amazon.ca/dp/B001CJIHFI
Along with this grit: https://www.amazon.ca/dp/B08KHLW2DJ
Oof, so the price has gone up but this is what I am using: https://www.amazon.ca/dp/B001CJIHFI
Along with this grit: https://www.amazon.ca/dp/B08KHLW2DJ
Does an old work sock count as a filter? I could use the gasoline though…
Oops, replied to the wrong comment, in actual answer to your question:
I’m using a Cricut vinyl cutter but would never recommend one to anyone, their locked down cloud app is terrible. After I get a stencil cut I stick it down and then mask off the entire rest of the glass with tape. For a blaster I am using a tiny one that looks like an airbrush, it was ~$100CAD on Amazon. I use a pair of old socks as gloves in the side of a big clear plastic tub they keep the grit inside and let the air out! And that’s about it, I just blast all the exposed glass until it is frosted, I don’t think you can ever blow right through but if I hit one spot for too long there is a step in the glass at the edge of the pattern.
That’s a good point, probably made of cadnium glass.
deleted by creator
The screenshot is a little lackluster but the video below shows it off better. The camera is an APSC sensor but the picture fills a full frame with very little vignetting. Up to 100x it looks pretty good but yeah, the DoF is literally micrometers thick.
FreeCAD has a steep learning curve, I’ve only just started with it, but it seems to cover every possible use case. Good luck!
Just PLA, I’ve only had the printer for a week. It will make it though the winter but I’m not sure about the rest of this summer.
You can import an image to an image plane using the Image Workbench then scale it. After that it can be shown or hidden like any other part of your design so you can just trace over it.
Yup, 2010 B2500.
I plan on cranking out replacement and upgraded parts for it now that I got the stringing under control.
I have an old set of vernier calipers that got me all of the non-curved measurements.
Glad you liked it!
Thanks, I ended up using a photo to get the profile into FreeCAD. It’s not a friction fit but with the phone in place it’ll never move.
Makes me wonder if there are any cyphers that are easy enough that human meat could implement it but hard enough that it would take some serious GPU time to crack?
Computers are hard, can everyone go back to unobfuscated telephone calls and handwritten letters?
There was a Defcon talk a few years ago (oh god it was 8 years ago) where someone found a way mess with Chryslers because they were all on the Sprint wireless network. Things like lock out the physical controls on the radio then max out the volume, or turn it into a GPS tracker, or disable the brakes! The cars had some service listening on port 6667, there was no way to stop them from accepting malicious connections so Sprint just blocked all traffic on that port on their network at the request of Chrysler. The speaker mentioned they were sorry if you were unable to use IRC any more on Sprint wireless.
DEF CON 23 - Charlie Miller & Chris Valasek - Remote Exploitation of an Unaltered Passenger Vehicle
Which is why I am laying 4 feet off the ground instead of ON the ground. Also the giant hogweed.
It’s a Tensile Trillium. First time I’ve had it out of the bag.
It’s huge, 4m on a side.
Thanks, the vinyl is a little fiddly to work with but it’s worth the work for one off pieces.